Correlated Content

APU1

AutoProm Quick-Start Guide   Real-Time Tuning / Emulation   1) Make sure car is in key-off position with no power to the ECM. Remove the 'stock' chip and install socket adapter (G1 or G2) if not al...

APU1 Support

AutoProm Quick-Start Guide [ 2007 Craig Moates, craig@moates.net ] Real-Time Tuning / Emulation 1) Make sure car is in key-off position with no power to the ECM. Remove the 'stock' chip and install...

APU1+Wideband+Datalog

This is a nice article written by Charles Woock on how to configure TunerPro RT to digest 0-5v inputs such as the LM1 and LC1. The values can be brought in through the APU1 via the APADC interface....

AutoProm (APU1)

The Autoprom was the first Moates device. It is a combination Emulator, Chip Burner and Datalogger. Today you can buy these devices separately, however this package eliminates the need for 3 sepa...

Dev: Hardware Interfacing Guide

Although our hardware uses USB connectivity, you don’t have to be a kernel level device driver programmer or any sort of expert in the USB framework to interface our devices.Our devices simply cre...

Emulation Cables

Emulation cables link our emulators to a target device.  The Ostrich, Ostrich2 and APU1 all use a similar style emulation cable.  The design of this cable has not changed in many years.  Four stan...

FAQ -> Typical Questions & Issues

Moates.net F.A.Q Last updated 2-03-06 Autoprom | ALDU1 | Burn1 | F1 | F2/F3 | F2E GM tuning F.A.Q. | Ford tuning F.A.Q. | Wideband F.A.Q. Tuner Pro | EEC Editor | Moates Software GM tuni...

Firmware Updates Support

About Firmware Updates and a Warning Periodically we release new firmware for our products. We generally recommend AGAINST updating firmware unless you have a very specific reason for doing so, a...

Flash N Burn

Flash & Burn Screen Shot Download Flash & Burn here. Flash & Burn is a software package used with the Burn1 and Burn2 EEPROM burners, as well as the Autoprom (APU1). Note, many tuni...

GM 86-95 OBD1 Guide (READ ME)

Basics When we talk about “OBD1” GM vehicles, we mean vehicles made from (approximately) 1986 to 1995.  These cars used several different types of engine controller – some have one injector for ea...

GM 94-95: Reflash or not?

94 and 95 were also kind of odd years for GM computers as they transitioned toward OBD2. There are several groups of ECMs. 94-95 LT1,LT4,LTx: These can be tuned via TunerCATS ( link ) with the $EE...

HDR1

Moates.Net HDR1 Memory Header Installation Instructions Instructions for using the 'HDR1' Memory Header The HDR1 memory adapter is primarily designed to download the existing code from a stoc...

HDR1 Support

HDR1 Instructions for using the ‘HDR1’ Memory Header   The HDR1 memory adapter is primarily designed to download the existing code from a stock Memcal.It can be used for other th...

Moates.net Philosophy (READ ME)

We are a small technically-oriented outfit that focuses on product development not fancy packaging, phone support, and marketing.  We bring you high-quality, value-priced products aimed at self-st...

OBD1 GM: Checksum Disable

The check sum routine is a piece of the ECU code that checks to make sure the program is valid.  When you use the “Save” or “Save As…” commands in TunerPro, TunerPro updates the checksum automatic...

Programming Chips Using Offsets Support

If you’re completely new to burning chips, you may want to take a look at the Beginners’ Guide before reading the rest of this article.  You will probably still need to read this guide in order to...

Troubleshooting: APU1 / AutoPROM

The AutoPROM is a complex device and it can be confusing to get up and running.  This guide is intended to get you to the point where you are connecting to a vehicle and able to use its functions....

Troubleshooting: Switches

Many of our products have physical switches on them to change device behavior.  Unfortunately, we’ve noticed quite a few problems related to these switches.  Over time, sometimes switches fail to ...

TunerPro RT

Tuner Pro is a piece of software written by Mark Mansur that is compatible with a great number of vehicles and ECUs. Download TunerPro here Originally written to modify GM and Ford binaries, the u...

TunerPro V5: Converting ADS to ADX format

Among other things, TunerPro RT brings a new definition format, the ADX.  This is an extended version of the previous file format, ADS.  The file formats are NOT compatible, but you can convert be...

USB Drivers – FTCLEAN

FTDI provide a utility called “FTCLEAN” that forcibly removes drivers from your computer.  WARNING: THIS WILL BREAK ALL DEVICES THAT USE FTDI DRIVERS, NOT JUST MOATES HARDWARE. Do not attempt this...

WinALDL Software

WinALDL is software to datalog on GM vehicles that use the old 160 baud rate.  This includes but is not limited to vehicles using a 1227747 and 1227165 ECM.  Most older TBI GM computers will speak...