The ‘Data trace’ feature of our emulators is probably one of the most misunderstood features. Trace is intended to give you some idea of what portions of an emulated ROM are being used by the tar...
AutoProm Quick-Start Guide
Real-Time Tuning / Emulation
1) Make sure car is in key-off position with no power to the ECM. Remove the 'stock' chip and install socket adapter (G1 or G2) if not al...
AutoProm Quick-Start Guide [ 2007 Craig Moates, craig@moates.net ] Real-Time Tuning / Emulation 1) Make sure car is in key-off position with no power to the ECM. Remove the 'stock' chip and install...
This is a nice article written by Charles Woock on how to configure TunerPro RT to digest 0-5v inputs such as the LM1 and LC1. The values can be brought in through the APU1 via the APADC interface....
The Autoprom was the first Moates device. It is a combination Emulator, Chip Burner and Datalogger.
Today you can buy these devices separately, however this package eliminates the need for 3 sepa...
For the Ostrich2, the following will show you how to install the Bluetooth into the unit:
1) Open the Ostrich (two screws), keep track of the two nylon spacers.
2) Gather up the Bluetooth kit par...
For the Ostrich2, the following will show you how to install the Bluetooth into the unit:
1) Open the Ostrich (two screws), keep track of the two nylon spacers.
2) Gather up the Blueto...
The Demon (or original Demon, Demon 1) pictured above is the first of our integrated devices aimed at Honda/Acura-friendly P28/P30/P72 OBD1 ECUs. Flawless realtime emulation, embedded dataloggin...
Introduction / Identification
The Demon2, pictured above, is the newest in our line of Honda/Acura-friendly P28/P30/P72-compatible technology. Flawless realtime emulation, embedded datalogging, a...
Emulation cables link our emulators to a target device. The Ostrich, Ostrich2 and APU1 all use a similar style emulation cable. The design of this cable has not changed in many years. Four stan...
Ever wish your favorite Moates emulator would work with your favorite ROM editor software that doesn’t have native support for our products? EmUtility (from the author of TunerPro) allows you to ...
Neptune RTP is a tuning hardware/software package for tuning OBD1 Honda and Acura vehicles developed by James Holy at HR Tuning. Quality hardware, quality software and solid support combine to pr...
Untitled Document
Here's how you install the Ostrich:
1) Get on the website here in the 'software and drivers' section and download and unzip the 'USB Drivers' file. Remember where you put it...
Rest in Peace
The Ostrich 1.0, which has now been discontinued, was the first in the Ostrich line. Upon the creation of the first Moates product, the Autoprom (APU1) the team at Moates quickly ...
The meanest emulator known to man.
The release of the Ostrich 2.0 was the marking point for the next generation of Moates products. Along with a 75% size reduction, the Ostrich 2.0 also boasts ...
About the QuarterHorse
The QuarterHorse delivers in unparalleled fashion. It plugs into the J3 port like a chip, but can do much more. The QH hardware is compatible with all EEC-IV and EEC-V ECMs...
The RoadRunner is the only available full blown emulator for LS1 PCMs – unlike other “emulation” software, the entire contents of the flash is emulated Real-Time, not just certain maps. It can a...
Lately, we’ve seen a lot of interest in using the RoadRunner as a general purpose ROM emulator for the Bosch ME7 platform as found in ~2000-2005ish Volkwagen 1.8t and Audi 2.7t applications. This...
