The ALDU1 is a datalogger designed to work with OBD I GM vehicles.
The ALDU1 is compatible with the CABL1 and the CABL2, which are interface cables that connect to GM OBD I and OBD II vehicle res...
The Autoprom was the first Moates device. It is a combination Emulator, Chip Burner and Datalogger.
Today you can buy these devices separately, however this package eliminates the need for 3 sepa...
The ALDU1 is a simple logging cable. It attaches to the USB port of your PC and to the ALDL logging port on your vehicle. It allows your PC to communicate with your ECM.
Basic Connectivity
The A...
EFI Live Commercial Scan and Tune comes with two VIN licenses. To tune more vehicles, you must provide us some information when you purchase VIN or stream licenses.
Requesting a New License
Plug...
Memory Adapter Installation Instructions: the Moates.Net 'G1' Adapter
(edited from Allan Reinke's review on www.iroczone.com)
(works on all your TPI setups, the 1992-93 LT1, and some late-model...
G1 Chip adapter picture
Overview
The G1 is an adapter that allows a chip or emulator to be plugged into OBD1 memcal based GM PCMs.
The GP1 kit is a G1 chip adapter and two 27SF512 flash chips ...
G2 TBI-Style 2732-to-29C256 Adapter Installation Instructions:
Here is a pictorial depiction of a G2 installation in a TBI-style ECM. It shows the following:
1) Disassembly and removal of stock s...
G2 TBI-Style 2732-to-29C256 Adapter Installation Instructions:Here is a pictorial depiction of a G2 installation in a TBI-style ECM.It shows the following:
1) Disassembly and removal o...
Moates.Net G3 Switching Adapter Installation Instructions
The 'G3' Switching Adapter
(also: Using the 'EX' with the G3)
For placing several different binaries on a single chip for GM applicat...
The ‘G3’ Switching Adapter
(also: Using the ‘EX’ with the G3)
Note: This product was updated in 2015. The original documentation (which still applies) follows with a discussion of differences bet...
Basics
When we talk about “OBD1” GM vehicles, we mean vehicles made from (approximately) 1986 to 1995. These cars used several different types of engine controller – some have one injector for ea...
94 and 95 were also kind of odd years for GM computers as they transitioned toward OBD2.
There are several groups of ECMs.
94-95 LT1,LT4,LTx: These can be tuned via TunerCATS ( link ) with the $EE...
Lately, we have been getting a lot of questions from people with 96-97 GM vehicles looking for a tuning solution. Unfortunately, these are transitional years where the electronics are incompatibl...
The main product that we make for 98+ GM vehicles is the RoadRunner emulator that allows realtime changes to be made to a LS1 ECM.
The RoadRunner is designed to be used with either EFI Live or Tun...
Good Choices (simple)
You have three choices for tuning forced induction on a TPI ECM (i.e. 7730).
Not REALLY a good option, but a simple one: use stock code, hack it around to be ok at WOT by po...
Introduction
TunerCat OBD2 Tuner is a software package that allows tuning of 96-current GM vehicles. For some early 96-97 vehicles, it is often the only solution. TunerCat OBD2 Tuner must be purc...
Moates.Net HDR1 Memory Header Installation Instructions
Instructions for using the 'HDR1' Memory Header
The HDR1 memory adapter is primarily designed to download the existing code from a stoc...
HDR1
Instructions for using the ‘HDR1’ Memory Header
The HDR1 memory adapter is primarily designed to download the existing code from a stock Memcal.It can be used for other th...
Our products (AutoProm, ALDU1) work with TTS Datamaster. We do not sell TTS Datamaster – this page is provided for informational purposes only. For more information, please see Datamaster’s webs...
Our OBD1 tuning products ( AutoProm, ALDU1+CABL1, BURN2, Ostrich) will work with CATS OBD1 Tuner. We do not sell this package – this page is provided for information purposes only. For more info...
The check sum routine is a piece of the ECU code that checks to make sure the program is valid. When you use the “Save” or “Save As…” commands in TunerPro, TunerPro updates the checksum automatic...
When Moates.net started, virtually all of our customers were people buying the tools we made for themselves and their own car. All of our products were shipped blank and tunes were loaded on them...
This is intended to provide a brief overview of the steps required to get up and running tuning an OBD1 GM vehicle. It is deliberately vague. Instead of providing an exhaustive guide here, there...
The RoadRunner is the only available full blown emulator for LS1 PCMs – unlike other “emulation” software, the entire contents of the flash is emulated Real-Time, not just certain maps. It can a...
Notes from EFI Live’s Paul Blackmore regarding using the auto-tuning feature of EFI Live with Moates hardware:
Check both axis of the VE table in the tuning tool to make sure the MAP and RPM hea...
When you set up a Roadrunner in a vehicle, you will often need to force a ‘hard reset’ of the Roadrunner PCM. This is particularly true if you are using a custom OS or changing OS type.
For using ...
The SocketBooster 1.0 exists to provide active conditioning for signals from our Ostrich2.0 and ChipExtender products. In some circumstances, the logic levels generated by these devices do not me...
The AutoPROM is a complex device and it can be confusing to get up and running. This guide is intended to get you to the point where you are connecting to a vehicle and able to use its functions....
Among other things, TunerPro RT brings a new definition format, the ADX. This is an extended version of the previous file format, ADS. The file formats are NOT compatible, but you can convert be...
