1 0

    Hardware

    Hardware

    Various hardware articles.

  • Hardware Installation Guide
  • This guide applies to all Moates hardware with USB interface. This includes: Ostrich 1.0 Ostrich...
  • Chip Burners
  • These are the chip module programmers and such.
  • AutoProm (APU1)
  • The Autoprom was the first Moates device. It is a combination Emulator, Chip Burner and Datalog...
  • Burn1
  • The Burn1 is a revolutionary device that was designed with the automotive enthusiast in mind. i...
  • BURN1+F2A+F2E: Reading Ford ECMs
  • There are two products that we sell that can read the program in a factory ECM: BURN1/BURN2 with...
  • Burn2
  • The Burn2 The Burn2 has the same features as the Burn1, only smaller and more compact. The Bu...
  • Fake 27SF512 Chips!
  • We’re Seeing Lots of Fake Chips! TLDR: If it seems too good to be true, it probably is too good ...
  • Flash N Burn
  • Flash & Burn Screen Shot Download Flash & Burn here. Flash & Burn is a software p...
  • Programming Chips: Using Offsets
  • How to use offsets when programming chips: If the chip you are programming is of a larger capac...
  • USB Driver and BURN2 Troubleshooting
  • The following is something which can be applied to anyone trying to troubleshoot a BURN1, BURN2, ...
  • Dataloggers
  • ALDU1
  • The ALDU1 is a datalogger designed to work with OBD I GM vehicles. The ALDU1 is compatible with...
  • Datalogging with an ALDU1
  • The ALDU1 is a simple logging cable.  It attaches to the USB port of your PC and to the ALDL log...
  • HuLog/HondaLog
  • The HuLog, HondaLog, and Xtreme HuLog are USB datalogging adapters that are used to datalog Hond...
  • O-Meter
  • Check out the documentation to understand what all this unit can do! Does AFR/Lambda/Universal di...
  • O-Meter Support
  • Categories: General O-Meter The O-Meter’s physical dimensions are 2.500″ x 1.625...
  • Quarterhorse
  • About the QuarterHorse The QuarterHorse delivers in unparalleled fashion. It plugs into the J3 ...
  • Emulators
  • About the “Data Trace” feature of our chip emulators
  • The ‘Data trace’ feature of our emulators is probably one of the most misunderstood features.  T...
  • APU1
  • AutoProm Quick-Start Guide   Real-Time Tuning / Emulation   1) Make sure car is in key-off positi...
  • APU1 Support
  • AutoProm Quick-Start Guide [ 2007 Craig Moates, craig@moates.net ] Real-Time Tuning / Emulation 1...
  • APU1+Wideband+Datalog
  • This is a nice article written by Charles Woock on how to configure TunerPro RT to digest 0-5v in...
  • AutoProm (APU1)
  • The Autoprom was the first Moates device. It is a combination Emulator, Chip Burner and Datalog...
  • Bluetooth for Ostrich
  • For the Ostrich2, the following will show you how to install the Bluetooth into the unit:   1) Op...
  • Bluetooth Install on Ostrich
  •   For the Ostrich2, the following will show you how to install the Bluetooth into the ...
  • Demon
  • The Demon (or original Demon, Demon 1) pictured above  is the first of our integrated devices a...
  • Demon II
  • Introduction / Identification The Demon2, pictured above, is the newest in our line of Honda/Ac...
  • Emulation Cables
  • Emulation cables link our emulators to a target device.  The Ostrich, Ostrich2 and APU1 all use ...
  • EmUtility: standalone emulator control
  • Ever wish your favorite Moates emulator would work with your favorite ROM editor software that d...
  • Neptune RTP
  • Neptune RTP is a tuning hardware/software package for tuning OBD1 Honda and Acura vehicles devel...
  • Ostrich
  • Untitled Document Here's how you install the Ostrich: 1) Get on the website here in the 'so...
  • Ostrich 1.0
  • Rest in Peace The Ostrich 1.0, which has now been discontinued, was the first in the Ostrich ...
  • Ostrich 2.0
  • The meanest emulator known to man. The release of the Ostrich 2.0 was the marking point for t...
  • Quarterhorse
  • About the QuarterHorse The QuarterHorse delivers in unparalleled fashion. It plugs into the J3 ...
  • Roadrunner
  • The RoadRunner is the only available full blown emulator for LS1 PCMs – unlike other “emulation...
  • RoadRunner and Bosch ME7
  • Lately, we’ve seen a lot of interest in using the RoadRunner as a general purpose ROM emulator f...
  • General
  • O-Meter
  • Check out the documentation to understand what all this unit can do! Does AFR/Lambda/Universal di...
  • O-Meter Support
  • Categories: General O-Meter The O-Meter’s physical dimensions are 2.500″ x 1.625...
  • SocketBooster 1.0 and 1.1
  • The SocketBooster 1.0 exists to provide active conditioning for signals from our Ostrich2.0 and ...
  • ROM Switching Kits
  • 2Timer
  • When using the 2Timer to switch between two 32k programs, you will want to program the chip direc...
  • 2Timer Support
  • The 2Timer is a great tool used by anyone who needs multiple fuel maps one one chip. Good exampl...
  • Ostrich ROM stacking
  • So you want to use your Ostrich 2.0 with one of our switching adapters? ( Two Timer, G2X, G3 ) T...
  • Rotary Switch Install for QuarterHorse
  • Rotary Switch Installation Procedures for QuarterHorse on EEC-IV   Here are pictures which detail...
  • View full details