1 0

    Manufacturer Specific

    Manufacturer Specific

  • Ford
  • Binary Editor 2010 and EEC Analyzer Registration
  • In order to issue you a license for Binary Editor, you must first download and install the softw...
  • Binary Editor 2012: Dongle updates for EEC Analyzer
  • If you purchase Binary Editor 2012 with a dongle from us, it will come pre-activated for Binary ...
  • BURN1+F2A+F2E: Reading Ford ECMs
  • There are two products that we sell that can read the program in a factory ECM: BURN1/BURN2 with...
  • Capacitor Repair: Ford A9L ECM
  • All electronics will fail with age.  A significant chunk of the failures are due to electrolytic...
  • Cloning Ford ECMs
  • You can use our tools to “clone” a 1986 – 2004 Ford ECM, without needing any definitions or tuni...
  • Dev: Making new datalogging definitions for QuarterHorse
  • Creating definitions for datalogging with the QH is a complicated, involved process.   Regardles...
  • EECEditor
  • EECEditor is a ROM Editor for many Ford vehicles.
  • F3
  • The F3 is a simple chip for EEC-based Ford ECUs allowing the stock program to be replaced with ...
  • F3v2
  •   Overview The F3v2 is a simple chip for EEC-based Ford ECUs (~86-04) allowing the stock prog...
  • Ford: Box code – strategy – vehicle cross reference
  • This page is intended to help people who have looked here to figure out if there is support for ...
  • Ford: “Calibrated” MAFs
  • Calibrated MAFs are something you are almost guaranteed to run into sooner or later tuning EECIV...
  • Ford: Diesel Programming
  • Product Pages:   F3, QH1Related Articles: F3, QH1Categories: All Articles, Ford Good news: Our h...
  • Ford: Information we need (READ ME)
  • We probably get 10 emails a week of the form: “Dear Moates, My name is ________ and I have a ___...
  • Ford Overview (READ ME)
  • “I have a Ford.  What do I need to tune my car?” is an email we frequently receive.  Hopefully t...
  • Ford: Strategies supported
  • Although you can use our Ford hardware ( F3 Jaybird QuarterHorse ) on just about any 86-2004 Ford...
  • Ford: TunerPro Definitions for QuarterHorse
  • In addition to any definitions you might find on TunerPro’s Webpage or TI Performance‘s webpage,...
  • Ford Tuning: Getting Started with Moates Hardware
  • Chapter 1: Introduction, Overview and Summary Questions you may have coming in: How do I determi...
  • Ford: Using our gear with other vendors’ products
  • Fairly regularly we get asked something along the lines of, “I had my car tuned by Joe Bob at Fa...
  • Logging a wideband with TunerPro RT: Ford/QH
  • Logging a wideband in TunerPro RT can be a little complicated because it requires simple algebra...
  • Quarterhorse
  • About the QuarterHorse The QuarterHorse delivers in unparalleled fashion. It plugs into the J3 ...
  • QuarterHorse: 1.4 to 1.6 Firmware
  • There has been one major firmware upgrade for the QuarterHorse.  There is minimal impact for EEC...
  • QuarterHorse: Battery Installation
  • Currently shipping QuarterHorses differ from the original in two subtle ways: There is a circui...
  • QuarterHorse – Optoisolator Install and Use
  • On some vehicles, the QH doesn’t work well due to an excessive amount of electrical noise or gro...
  • Tuner Pro RT v5: Using TPRT with QuarterHorse
  • The QuarterHorse Ford tuning tool is supported by TunerPro RT version 5 and newer.  This documen...
  • TunerPro RT
  • Tuner Pro is a piece of software written by Mark Mansur that is compatible with a great number o...
  • GM
  • ALDU1
  • The ALDU1 is a datalogger designed to work with OBD I GM vehicles. The ALDU1 is compatible with...
  • AutoProm (APU1)
  • The Autoprom was the first Moates device. It is a combination Emulator, Chip Burner and Datalog...
  • Datalogging with an ALDU1
  • The ALDU1 is a simple logging cable.  It attaches to the USB port of your PC and to the ALDL log...
  • EFI Live: Requesting a VIN license
  • EFI Live Commercial Scan and Tune comes with two VIN licenses. To tune more vehicles, you must ...
  • EFILive
  • The RoadRunner works with EFILive, which is compatible with all LS1 PCMs.
  • G1/GP1 or G4
  • Memory Adapter Installation Instructions: the Moates.Net 'G1' Adapter (edited from Allan Rein...
  • G1 Support Page
  • G1 Chip adapter picture Overview The G1 is an adapter that allows a chip or emulator to be p...
  • G2
  •   G2 TBI-Style 2732-to-29C256 Adapter Installation Instructions: Here is a pictorial depiction of...
  • G2 Adapter Installation
  • G2 TBI-Style 2732-to-29C256 Adapter Installation Instructions:Here is a pictorial depi...
  • G3/GP3
  • Moates.Net G3 Switching Adapter Installation Instructions The 'G3' Switching Adapter (also:...
  • G3/GP3 Configuration and Use
  • The ‘G3’ Switching Adapter (also: Using the ‘EX’ with the G3) Note: This product was updated in ...
  • GM 86-95 OBD1 Guide (READ ME)
  • Basics When we talk about “OBD1” GM vehicles, we mean vehicles made from (approximately) 1986 to...
  • GM 94-95: Reflash or not?
  • 94 and 95 were also kind of odd years for GM computers as they transitioned toward OBD2. There a...
  • GM 96-97: The “odd” years
  • Lately, we have been getting a lot of questions from people with 96-97 GM vehicles looking for a...
  • GM 98+ OBD2 Guide (READ ME)
  • The main product that we make for 98+ GM vehicles is the RoadRunner emulator that allows realtim...
  • GM: TPI Forced Induction
  • Good Choices (simple) You have three choices for tuning forced induction on a TPI ECM (i.e. 7730...
  • GM: TunerCat OBD2 Tuner
  • Introduction TunerCat OBD2 Tuner is a software package that allows tuning of 96-current GM vehic...
  • HDR1
  • Moates.Net HDR1 Memory Header Installation Instructions Instructions for using the 'HDR1' M...
  • HDR1 Support
  • HDR1 Instructions for using the ‘HDR1’ Memory Header   The HDR1 memory adapter...
  • Moates hardware works with TTS Datamaster
  • Our products (AutoProm, ALDU1) work with TTS Datamaster.  We do not sell TTS Datamaster – this p...
  • Moates hardware works with TunerCat OBD1 Tuner
  • Our OBD1 tuning products ( AutoProm, ALDU1+CABL1, BURN2, Ostrich) will work with CATS OBD1 Tuner...
  • OBD1 GM: Checksum Disable
  • The check sum routine is a piece of the ECU code that checks to make sure the program is valid. ...
  • OBD1 GM Commercial Tuners
  • When Moates.net started, virtually all of our customers were people buying the tools we made for...
  • OBD1 GM: Getting Started
  • This is intended to provide a brief overview of the steps required to get up and running tuning ...
  • Roadrunner
  • The RoadRunner is the only available full blown emulator for LS1 PCMs – unlike other “emulation...
  • RoadRunner: EFI Live with RTACS Support
  • Notes from EFI Live’s Paul Blackmore regarding using the auto-tuning feature of EFI Live with M...
  • Roadrunner: Hard Resets Support
  • When you set up a Roadrunner in a vehicle, you will often need to force a ‘hard reset’ of the Ro...
  • SocketBooster 1.0 and 1.1
  • The SocketBooster 1.0 exists to provide active conditioning for signals from our Ostrich2.0 and ...
  • Troubleshooting: APU1 / AutoPROM
  • The AutoPROM is a complex device and it can be confusing to get up and running.  This guide is i...
  • TunerPro V5: Converting ADS to ADX format
  • Among other things, TunerPro RT brings a new definition format, the ADX.  This is an extended ve...
  • Honda
  • Auto to Manual
  • To perform an auto to manual conversion on an OBD I Honda ECU, use the following procedure: Ver...
  • CROME
  • John Cui   CROME is a ROM-Editor written primarily for OBD I Honda ECUs. A Pro version is ava...
  • Demon
  • The Demon (or original Demon, Demon 1) pictured above  is the first of our integrated devices a...
  • Demon II
  • Introduction / Identification The Demon2, pictured above, is the newest in our line of Honda/Ac...
  • Honda Chipping Kit
  • by keebler65 on UberData http://home.mn.rr.com/keebler65/honda Intro Uberdata is basically a F...
  • Honda Chipping Kit Install
  • This is Keebler65’s old guide. Some of the chipset and software info is a bit dated, but the tec...
  • Honda Chipping Kit Install: SMD for JDM/Small-Box ECUs
  • You will need bridge J1 on the back of the ECU. Add C49 & C50 and C91 & C92 on back C4...
  • Honda Engine Sim
  • The Honda EngineSim was introduced to allow interactive bench testing of Honda ECUs.  It suppli...
  • Honda: Identifying your ECU
  • Honda ECUs have a Diagnostic Generation, Model and a Board Revision. The diagnostic generations...
  • Honda Kit
  • The Honda chip kit contains all the components necessary to put a chip in your OBD I Honda ECU. ...
  • Honda Overview READ ME!
  • Only certain Hondas can be tuned using our hardware. In short, these are any vehicles that run a...
  • Honda Tuning with Crome
  • This is a very nice PDF tutorial written up by Darren Kattan. Check it out by clicking HERE.
  • HuLog/HondaLog
  • The HuLog, HondaLog, and Xtreme HuLog are USB datalogging adapters that are used to datalog Hond...
  • HULOG/HondaLog Installation
  •   Hulog/Hondalog Installation of Honda-Based USB Datalogging Tools   There are ...
  • Neptune RTP
  • Neptune RTP is a tuning hardware/software package for tuning OBD1 Honda and Acura vehicles devel...
  • Troubleshooting: HULOG/CROME datalogging issues
  • While it may look simple, getting the Honda logging cables we sell to work with CROME can be qui...
  • Unsupported Honda Setups
  • A Word of Warning This article was accurate as of the time it was written (2009) but things may ...
  • VTEC Conversion
  • This page is here to add VTEC capability to your otherwise non-VTEC ECU. The reason we are able ...
  • Nissan
  • Nismotronic: Incompatible ECUs
  • Lately, there have been several users having issues getting a Nissan ECU with a 20×2 header that...
  • Nissan: 20×2 2Chip-64k ROM Board
  • These ROM boards are for Nissans that use a 64k program with a 20×2 header.  These boards requir...
  • Nissan 20×2 Boards
  • Versions This is the documentation for the Nissan Boards.  At this point, there are only one ver...
  • Nissan: NEMU hardware install
  • The hardware portion of the NEMU tuning package requires installation in an ECU to be functional...
  • Nissan: NEMU+Nismotronic Tuning Package
  • The Nemu+Nismotronic Tuning Package is a complete, single-vehicle solution. High-speed dataloggi...
  • Nissan Overview
  • Many Nissans can use our tools to reprogram their factory ECUs. Types of Nissan Computer Trivial...
  • SocketBooster 1.0 and 1.1
  • The SocketBooster 1.0 exists to provide active conditioning for signals from our Ostrich2.0 and ...
  • TunerPro RT
  • Tuner Pro is a piece of software written by Mark Mansur that is compatible with a great number o...
  • VAG: VW / Audi
  • RoadRunner and Bosch ME7
  • Lately, we’ve seen a lot of interest in using the RoadRunner as a general purpose ROM emulator f...
  • View full details